With your phone turned off, connect
the lead from the charger to the bottom
of the phone. Connect the charger to an
AC wall outlet.
The battery indicator bar appears on the
screen and starts to scroll from bottom to top
after a few seconds. It will remain constant
when the phone is fully charged.
2
Disconnect the charger from the phone and
AC outlet when the battery is fully charged.
After the indicator bar stops scrolling, you can
leave the charger connected and the battery
will accept a “trickle charge” to maintain a
fully charged battery. See “Reference information” on page 132 for more
information on batteries.
Note: Charge the new battery for three hours before using. Use the
battery until it is fully discharged. You should do this for a total of
three charging cycles. After the first charge, you can make and
receive calls during the charging cycle, but the calls interrupt the
charge. When a call ends, the charge will resume. The charging
time depends on the charger and battery you use.
[ 13 ]
Review the basics
3
• REMOVE THE BATTERY
Before removing your phone’s battery, make sure the phone has been
turned off for 10 seconds.
1
Remove the back cover of the phone by gripping the bottom with one
thumb and pressing downward with the other.
2
Place your index finger in the
space at the top of the battery,
and lift out of phone.
3